Electromagnetic flow meter รุ่น DH1000 สำหรับงาน Sanitary

Overview

High accuracy of ± 0.2%, ± 0.3%, ± 0.5%, low power consumption, stable zero point, easy parameter setting, total and instantaneous flowrate, velocity and percentage of flowrate. Two-direction measurement for forward andreverse. Not effected by the change of the fluid condition such as density, viscosity, temperature, pressure and conductivity, and the signal outputof inductive voltage is linear to average velocity. No obstacle parts in the meter tube so that no extra pressure loss. Various liner and electrode can be selected to satisfy most industrial applications. ANSI, DIN, DN flanges available. IP65 and IP68Protection class is available, the sensor can sink into the water FEP Liner is suit for vacumm tube.

Technical Parameter

Flowtube Linear
Linear Compatibility
• PTFE – resistant up to 120 °C
• Polyurethane – not resistant
• ETFE – resistant up to 120 °C
• Neoprene – not resistant
• Natural Rubber – not resistant
• Ryton – not resistant
Electrode Material
Electrode Compatibility
• 316 SST- corrosion rate of less than 0.020 in.per year, up to 80 °C
• Hastelloy C-276 – corrosion rate of less than 0.0020 in. per year, up to 20 °C
• Tantalum – corrosion rate of less than 0.020 in.per year, up to 120 °C
• Platinum-10% Iridium – corrosion rate of less than 0.0020 in. per year, up to 20 °C
• Titanium – corrosion rate of greater than 0.050 in. per year (not recommended)

Technical Parameter

Pparatus Selection

DH1000 External Dimension for Integration and Partial Installation